Hot plate welding machine structural characteristics
Structural features are: hot plate in motion, smooth movement and less space. On the hot plate body with hot plates and the upper and lower hot mold, as well as the heating plate fixed quick coupling mechanism hot mold, can effectively and quickly switch to a different product to optimize its use, improve production efficiency.
Upper and lower template run institutions:
Upper and lower limit template by four guide rods are coupled together with a hot plate, you can fine-tune the welding depth, together constitute the main moving parts of a device.
Template sports organizations:
Upper platen moving mechanism by the cylinder, linear bearings, four pillars φ30 guide rod, die, die pneumatic clamping device, vacuum suction cups and other components. Cylinder as a power source to drive the platen mechanism along four linear motion guide rod testimony. Vacuum system adopts imported vacuum generator output vacuum pressure by vacuum suction to suck the plastic pieces firmly to ensure proper positioning of plastic parts, plastic parts without damaging the surface.
Bumper hot plate welding machine
Bumper welding machine pumping plate structure, the electric heating method heating plate heat transfer to the upper and lower plastic weld surface heating element. So that surface melting, and then exit the heating plate quickly after the upper and lower pieces of heated molten surface fusion, curing, into one. The whole framework of the form, from the template, the next template, template three large hot plates, and features a hot mold, the upper and lower plastic cold model, action for pneumatic control. Mainly applied to household appliances, lights, and other automotive plastic parts melting solder. Depending on the size of the plastic parts can set the heating power and die size to achieve a variety of plastic parts welding, simple, easy to use. Heating plate composed by two up and down, it is heated by electric tube. Hot plate welding machine a total of two separately controlled upper and lower mold temperature controller temperature. Welding can be set in the range of 0 ~ 600 ℃ according to actual needs welding. The device control can be divided into two kinds of manual and automatic control, manual for single action, commissioning, mainly for institutional and manually adjusted the mold after production to adjust to automatic. Automatic control system uses a programmable controller (PLC) and touch-screen interface to control.
Hot plate welding machines use electric melting principle, prepared to control the temperature changes, supported by a sound mechanism to achieve the perfect welding, ultrasonic welding machine to compensate for the lack of large and special plastic welding workpiece. Mainly suitable for PP, PE and other thermoplastic materials and weld area the size of a large and complex piece of plastic welding.